Porter Cable Drill And Impact Set | Cordless Drill Supply (2023)

FAQs

How much torque does Porter Cable 20V drill have? ›

PORTER CABLE Drill: 20V DC, Compact Premium, 1/2 in Chuck, 1,800 RPM Max., 270 in-lb Max Torque.

In an ideal world, you should have both tools so you have the best tool for all drilling and driving applications. This also gives you the ability to use the drill for pilot holes and use the impact driver to sink fasteners. Since you don't have to switch bits for each fastener, you're much more productive.

Limit the use of an impact driver to projects where the hole's size or placement is less critical than the amount of torque to do the job. Furthermore, impact drivers are not suitable for drilling into hard materials like brick or concrete. For that, choose a hammer drill.

About this item. 1/2 inch two speed drill/driver. High performance motor delivers 283 Units Watts Out and 0-350/0-1,500 RPM. 1/4 inch impact driver delivers 1450 in/lbs of torque, 0-2,800 RPM and 0-3,100 BPM.

Newton Metres (Nm) on drills:

4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.

A: NO! I just checked pictures of the DeWalt 20V Battery and Charger. They have 5 slots on the electrical connection and my 20V B&D and Porter-Cable batteries have only 4. I used a Dremmel to cut notches in my B&D and Porter-Cable batteries to make them compatible.

Impact drivers are not designed to drill holes and they can't take all of the accessories that a cordless drill can. However, if you need to drive a lot of screws – especially screws that are either thick or long – a cordless impact driver is going to outperform a cordless drill every time.

Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they're made from.

The impact driver is much stronger than a drill in terms of the way it can deliver that extra torque to break loose stuck bolts and screws or drive them deeper into the material.

Be careful not to overtighten fixings as you will strip or stretch the threads. This is the most common mistake. It's easy to underestimate the amount of torque applied by an impact wrench, especially for inexperienced workers. Even if no damage is done, over-tightened fixings can be difficult to loosen.

Is more torque better in a drill? ›

A NEW WAY TO LOOK AT POWER

A common misconception is: the higher the torque rating, the faster the drill will complete an application. That's not necessarily true. Torque is the force the drill produces to turn an object, not how fast an object will turn.

The Metabo HPT D13VF corded drill not only offers a maximum torque of 416.6 inches–pounds, but also has a form-fit palm-grip that provides greater control, as well as minimal vibration, and it has a variable speed trigger. This tool, however, is on the heavier side so may be tricky to use when working above your head.

The DCCF887 20V MAX* XR 1/4 in. 3-Speed Impact Driver delivers up to 1825 in-lb of torque in a compact design of just 5.3 inches front to back. The multi-speed settings increase productivity in a wide variety of applications.

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

Typically ranging from 450 watts for basic models to around 1500 watts for the more powerful hammer drills. A higher wattage is better for drilling masonry. While if drilling into plasterboard, a lower wattage will suffice. For most basic home DIY jobs, a 550 watt drill is adequate.

Most drills have amperage between 5 and 10 amps, which equals 600 and 1200 watts respectively. Modern cordless drills have enough power to perform the vast variety of jobs, although their force is limited by the battery.

This battery adapter allow you to use Porter Cable 20V batteries on DeWalt 20V tools.

Powerextra 20V Max 6.0Ah Lithium Replacement Battery Compatible with Porter Cable PCC685L PCC680L Cordless Tools Batteries.

Here are two things you probably don't know: One, a whole bunch of the top power tool brands — including DeWalt, Black & Decker, Craftsman, Porter-Cable and more — are all owned by the same company, Stanley Black & Decker.

Many hammer drills allow this, though some SDS models do not. Describing a tool as an “impact driver” might suggest it has a similar action to a hammer. In some ways it does, though an impact driver provides increased rotational energy, better known as torque. Inside the impact driver body is a heavy-duty spring.

Is a brushless drill better than one with brushes? ›

Capable of packing more power, torque, and speed.

Without brushes to cause friction and slow things down, brushless drills pack more power and torque. They can reach higher speeds, too. "You can expect a 15 to 35 percent increase in performance compared with a brushed motor drill," says Banta.

Impact drivers are typically much smaller, shorter and lighter than hammer drills, making them more useful in tight places or awkward spaces. Hammer drills often have speed and torque settings, whereas impact drivers have pressure-sensitive triggers to control speed.

Chrome-plated sockets should never be used with an impact driver. Regular chrome-plated sockets can crack or shatter and send pieces flying. Use only impact-rated sockets for impact guns, and impact-rated sockets or nut drivers for smaller cordless impact drivers.

Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.

Impact sockets tend to be "beefier" than regular ones, but if you don't need to fit them into a tight position they will function Just fine for you. Don't use regular sockets with an impact.

For light screw work, a torque of 25Nm is sufficient. If you choose a drill with a torque of between 25 and 50Nm, you can use it for all the usual jobs in and around the house. With more than 50Nm, even professionals will have enough power for heavy screw work.

A drill/driver powers a constant 550 in/lbs of torque at about 1,500 rotations per minute (RPMs) with permanently engaged gears for high-speed hole drilling or driving simple fasteners.

Description. The CRAFTSMAN V20 cordless 1/4 in. Impact driver has a max torque rating of 1, 460 inlbs for speed and ease of driving large fasteners. The one handed bit insert makes changes quick and easy.

An impact driver is more compact and lightweight by design. It also has more torque than a power drill. These tools are available in cordless designs ranging from 12 volts up to 20 volts. As the voltage increases, so does the power and speed of the impact driver.

A minimum of 400 pound-feet of torque should give the power needed to remove lug nuts and perform most suspension work. However, if you live in the rust belt or near an ocean, you may want to consider an impact wrench with a torque rating of 500 pound-feet or more.

Is more torque better for impact driver? ›

Generally speaking, an impact driver with 1500–1800 in-lbs that puts more emphasis on higher RPM will do 95% of the work faster than one with more torque and slower speeds. Our rule of thumb: If you need to reach for a socket adapter, you're better off grabbing an impact wrench! Want more?

Corded drills have more power than their cordless counterparts, making them useful for heavy-duty tasks like drilling through sheets of metal or hardwood. While you have to stay close to an outlet because of their cord, electric drills don't have to recharge before every use.

Milwaukee M18 2606-22CT

At 500 inch-pounds, no other drill has a higher maximum torque rating. It has one of the better warranties, with five years for the tool itself, and two years for the battery. This cordless drill kit includes an M18 compact half-inch drill driver and two M18 lithium-ion batteries.

So in addition to having double the cells, the 5.0Ah battery also has a higher energy density in each one. In general, higher amp hours mean more runtime and higher voltage means more power.

Given full power to the motor, a drill provides the most torque at its lowest gear or speed. The higher gear produces less torque. So, on a 2-speed drill, to get the most torque you would leave the drill in Gear 1 (Low).

What's the difference between corded and cordless drills in terms of torque? On average, cordless drills appear to have a higher maximum torque than corded drills.

20V MAX is the Same as 18 Volts Nominal – Proven by DeWalt

20V Max equals 18V nominal voltage. On both DeWalt and Craftsman tools, you'll notice their packaging marked 20V MAX*. That asterisk and the word “MAX” point to the documentation that clearly states the voltage is rated at its maximum.